DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Network Address
VRF Name
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
RIPng
RIPng Settings
This window is used to display and configure the Routing Information Protocol Next Generation (RIPng) settings, also
known as IPv6 RIP.
To view the following window, click L3 Features > RIPng > RIPng Settings, as shown below:
Figure 6-44 RIP Database Window
Description
Enter the subnet prefix and the prefix length of the network(s) to be displayed
here.
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Figure 6-45 RIPng Settings Window
246