D-Link DGS-3630 Series Reference Manual page 78

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
DHCP Relay Unicast State
Click the Apply button to accept the changes made.
DHCP Relay Pool Settings
This window is used to display and configure the DHCP relay pool on a DHCP relay agent.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Pool Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Pool Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the corresponding information of the specific DHCP pool.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button under Source, the following window will appear.
Figure 4-46 DHCP Relay Global Settings Window
Description
Select to globally enable or disable the DHCP relay unicast state here.
Figure 4-47 DHCP Relay Pool Settings Window
Description
Enter the address pool name with a maximum of 32 characters.
Figure 4-48 DHCP Relay Pool Settings (Source Edit) Window
66