Reboot Schedule Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Add button to add a new SMTP email recipient.
The fields that can be configured in Send a Test Mail to All are described below:
Parameter
Subject
Content
Click the Apply button to accept the changes made.
Click the Delete All button to delete all the entries found in the display table.
Click the Delete button to delete the specified entry.

Reboot Schedule Settings

This window is used to display and configure the reboot schedule settings. Use this window to configure the reboot
schedule of the Switch. The reboot schedule must take effect within 30 days. After the reboot schedule has taken
effect and the Switch is restarted, it will generate a log message to identify that the Switch has been restarted using
the reboot schedule. After a reboot or a shutdown, the reboot schedule will be deleted automatically. If the Switch was
manually rebooted or powered off, before the reboot schedule could take effect, the specified reboot schedule will be
cancelled.
To view the following window, click Management > Reboot Schedule Settings, as shown below:
The fields that can be configured are described below:
Parameter
Time Interval
Time
Date
Save Before Reboot
Click the Apply button to accept the changes made.
Description
characters long.
Description
Enter the subject of the email here. This string can be up to 128 characters long.
Enter the content of the email here. This string can be up to 512 characters long.
Figure 4-105 Reboot Schedule Settings Window
Description
Select and enter the reboot schedule time interval value here. The reboot will be
initiated after the specified time interval has passed. The range is from 1 to 43200
minutes (30 days).
Select and enter the time at which the reboot should be initiated here. This time
uses the 24-hour format, for example, 21:30. If the date was not specified, the
reboot will be initiated when the system clock reaches the time specified within
the next 24 hours.
Select and enter the date at which the reboot should be initiated here. This date
uses the following format: DD/MM/YYYY. For example, 23/12/2015. The reboot
schedule can only be initiated within 30 days of configuration.
Select this option to save all configuration changes made before the reboot is
initiated.
116