D-Link DGS-3630 Series Reference Manual page 441

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Specify ICMP Message
Type
ICMP Message Type
Message Code
IP Precedence
ToS
DSCP
TCP Flag
Time Range
Action
Click the Back button to return to the previous step.
Click the Next button to continue to the next step.
Description
mask will be used. Enter the destination port mask value in the space
provided. The range is from 0x0 to 0xFFFF.
This parameter is only available in the protocol type TCP and UDP.
Select the ICMP message type used here.
This parameter is only available in the protocol type ICMP.
When the ICMP Message Type is not selected, enter the ICMP Message Type
numerical value used here. The range is from 0 to 255. When the ICMP Message
Type is selected, this numerical value will automatically be entered.
This parameter is only available in the protocol type ICMP.
When the ICMP Message Type is not selected, enter the Message Code
numerical value used here. The range is from 0 to 255. When the ICMP Message
Type is selected, this numerical value will automatically be entered.
This parameter is only available in the protocol type ICMP.
Select the IP precedence value used here. Options to choose from are routine
(0), priority (1), immediate (2), flash (3), flash-override (4), critical (5), internet
(6), and network (7).
• Value - The IP precedence value can also manually be entered here. The
range is from 0 to 7.
• Mask - Enter the IP precedence mask value here. The range is from 0x0 to
0x7.
Select the Type-of-Service (ToS) value that will be used here. Options to choose
from are normal (0), min-monetary-cost (1), max-reliability (2), max-
throughput (4), and min-delay (8).
• Value - The ToS value can also manually be entered here. The range is from
0 to 15.
• Mask - Enter the ToS mask value here. The range is from 0x0 to 0xF.
Select the DSCP value that will be used here. Options to choose from are default
(0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32
(28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4
(32), cs5 (40), cs6 (48), cs7 (56), and ef (46).
• Value - The DSCP value can also manually be entered here. The range is
from 0 to 63.
• Mask - Enter the DSCP mask value here. The range is from 0x0 to 0x3F.
Tick the appropriate TCP flag option to include the flag in this rule. Options to
choose from are ack, fin, psh, rst, syn, and urg.
This parameter is only available in the protocol type TCP.
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Select the action that this rule will take here. Options to choose from are Permit,
Deny and Deny CPU.
429