Topology - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Group Name
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Settings are described below:
Parameter
Trap State
Interval
Hold Time
Management VLAN
Click the Apply button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four
added links to aid in configuring SIM through the Web UI, including Topology, Firmware Upgrade, Configuration
File Backup/Restore and Upload Log File.

Topology

This window is used to view, manage and configure the Switch within the SIM group and requires Java script to
function properly on your computer.
To view the following window, click Management > Virtual Stacking (SIM) > Topology, as shown below:
Description
for SIM.
Enter a group name. This is optional. This name is used to segment Switches into
different SIM groups.
Description
Select to enable or disable the SIM trap state here.
Enter the interval in seconds. The range is from 30 to 90.
Enter the hold-time in seconds. The range is from 100 to 255.
Enter the single IP management message VLAN ID.
105