D-Link DGS-3630 Series Reference Manual page 94

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
DHCPv6 Relay Port Settings
This window is used to display and configure the DHCPv6 relay port settings.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Port Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
State
Click the Apply button to accept the changes made.
DHCPv6 Local Relay VLAN
This window is used to display and configure the DHCPv6 local relay VLAN settings. When DHCPv6 local relay is
enabled, it will add Option 37 and Option 18 to the request packets from the client. If the check state of Option 37 is
enabled, it will check the request packet from the client and drop the packet if it contains the Option 37 DHCPv6 relay
function. If disabled, the local relay function will always add Option 37 to request packets, whether the state of Option
37 is enabled or disabled. The DHCPv6 local relay function will directly forward the packet from the server to the client.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Local Relay VLAN, as
shown below:
The fields that can be configured are described below:
Parameter
DHCPv6 Local Relay VID
List
Figure 4-62 DHCPv6 Relay Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the DHCPv6 relay port feature on the specified port(s)
here.
Figure 4-63 DHCPv6 Local Relay VLAN Window
Description
Enter the DHCPv6 local relay VLAN ID(s) here. More than one VLAN ID can be
entered here. Select the All VLANs option to apply this setting on all configured
VLANs on this Switch.
82