D-Link DGS-3630 Series Reference Manual page 69

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
After clicking the Configure button, the following page will appear.
The fields that can be configured are described below:
Parameter
VRF Name
Boot File
Domain Name
Network (IP/Mask)
Next Server
Default Router
DNS Server
Netbios Name Server
Netbios Node Type
Description
entered.
Figure 4-33 DHCP Server Pool Settings (Configure) Window
Description
Enter the name of the VRF instance here. This can be up to 12 characters long.
Enter the boot file name here. This can be up to 64 characters long.
Enter the domain name for the DHCP client here. This can be up to 64 characters
long.
Enter the network IPv4 address and subnet mask for the DHCP client here.
Enter the next server IPv4 address here. The boot image file is stored on this
server and can be retrieved by DHCP clients using this IP address. The server is
typically a TFTP server. Only one next server IP address can be specified.
Enter the IPv4 address of the default router for the DHCP client here. Up to 8 IPv4
address can be entered here. The IP address of the router should be on the same
subnet as the client's subnet. Routers are listed in the order of preference. If
default routers are already configured, the default routers configured later will be
added to the default interface list.
Enter the IPv4 address to be used by the DHCP client as the DNS server here.
Up to 8 IPv4 address can be entered here. Servers are listed in the order of
preference. If DNS servers are already configured, the DNS servers configured
later will be added to the DNS server list.
Enter the WINS name server IPv4 address for the DHCP client here. Up to 8 IPv4
address can be entered here. Servers are listed in the order of preference. If
name servers are already configured, the name server configured later will be
added to the default interface list.
Select the NetBIOS node type for Microsoft DHCP clients here. The node type
determines the method that NetBIOS uses to register and resolve names. Options
to choose from are Broadcast, Peer To Peer, Mixed, and Hybrid. A Broadcast
57