Ipv6 Static Route Bfd; Ipv6 Route Table - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Backup State
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv6 Static Route BFD

This window is used to display and configure the IPv6 static route Bidirectional Forwarding Detection (BFD) settings.
To view the following window, click L3 Features > IPv6 Static Route BFD, as shown below:
The fields that can be configured are described below:
Parameter
Interface Name
IPv6 Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv6 Route Table

This window is used to display and configure the IPv6 route table.
To view the following window, click L3 Features > IPv6 Route Table, as shown below:
Description
default administrative distance for a static route is 1.
Select the backup state option here. Options to choose from are Primary, and
Backup. When the Primary option is selected, the route is specified as the
primary route to the destination. When the Backup option is selected, the route is
specified as the backup route to the destination.
Figure 6-25 IPv6 Static Route BFD Window
Description
Enter the name of the interface that will be used to create the BFD session here.
This name can be up to 12 characters long.
Enter the IPv6 address of the BFD peer here.
231