Dhcpv6 Server Interface Settings - D-Link DGS-3630 Series Reference Manual

Layer 3 stackable managed switch web ui reference guide
Hide thumbs Also See for DGS-3630 Series:
Table of Contents

Advertisement

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Exclude Address,
as shown below:
The fields that can be configured are described below:
Parameter
Low IPv6 Address
High IPv6 Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
DHCPv6 Server Binding
This window is used to view and clear the DHCPv6 server binding entries.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Binding, as shown
below:
The fields that can be configured are described below:
Parameter
IPv6 Address
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear the entries based on the information specified.

DHCPv6 Server Interface Settings

This window is used to display and configure the DHCPv6 server interface settings.
Figure 4-42 DHCPv6 Server Exclude Address Window
Description
Enter the excluded IPv6 address or first IPv6 address in the excluded address
range here.
Enter the last IPv6 address in the excluded address range here (optional).
Figure 4-43 DHCPv6 Server Binding Window
Description
Enter the binding entry IPv6 address to be displayed or cleared here. Select the
All option to display or clear all DHCPv6 client prefix bindings in or from the
binding table.
64

Advertisement

Table of Contents
loading

Table of Contents