Lldp Dot1 Tlvs Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Port Description
System Name
System Description
System Capabilities
Click the Apply button to accept the changes made.

LLDP Dot1 TLVs Settings

The LLDP Dot1 TLVs Settings page is used to enable or disable outbound LLDP advertisements for IEEE 802.1
organizationally unique port VLAN ID TLVs.
To view the following window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings, as shown below:
The fields that can be configured are described below:
Figure 5-98 LLDP Basic TLVs Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the Port Description option.
Select this option to enable or disable the System Name option.
Select this option to enable or disable the System Description option.
Select this option to enable or disable the System Capabilities option.
Figure 5-99 LLDP Dot1 TLVs Settings Window
207