D-Link DGS-3630 Series Reference Manual page 355

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Address Family
Type
Click the Clear button to clear the information associated with the selections made.
After clicking the Please Select button, the following page will appear.
Figure 6-183 BGP Dampening Flap Statistics Table (Please Select) Window
Figure 6-182 BGP Dampening Flap Statistics Table Window
Description
Select the address family that will be used here. Options to choose from are:
• IPv4 Unicast - Specifies to use the IPv4 unicast address family in this
configuration.
• IPv4 VRF - Specifies to use a VRF instance in this configuration. Enter the
name of the VRF instance in the space provided or click the Please Select
button to select a pre-configured VRF instance that will be used here. This
name can be up to 12 characters long.
• IPv4 Multicast - Specifies to use the IPv4 multicast address family in this
configuration.
• IPv6 Unicast - Specifies to use the IPv6 unicast address family in this
configuration.
Select the type clear here. Options to choose from are:
• All - Specifies to display and clear all BGP dampening flap statistics.
• IP Address - Specifies to display and clear BGP dampening flap statistics
based on the IPv4 address entered. Enter the IPv4 address in the space
provided.
• Network Address - Specifies to display and clear BGP dampening flap
statistics based on the IPv4 network address range entered. Enter the
starting IPv4 address and the ending IPv4 address in the range in the spaces
provided.
• IPv6 Address - Specifies to display and clear BGP dampening flap statistics
based on the IPv6 address entered. Enter the IPv6 address in the space
provided.
• IPv6 Network Address - Specifies to display and clear BGP dampening flap
statistics based on the IPv6 network address range entered. Enter the IPv6
address and the prefix length in the space provided.
343