D-Link DGS-3630 Series Reference Manual page 68

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Class Name
Start Address
End Address
Click the Apply button to accept the changes made.
Click the Delete by Name button to remove the DHCP class association by name.
Click the Delete by Address button to remove the DHCP class association by address.
Click the Back button to return to the previous window.
After clicking the Edit Option button, the following page will appear.
The fields that can be configured are described below:
Parameter
Option
Type
Figure 4-31 DHCP Server Pool Settings (Edit Class) Window
Description
Select an existing DHCP class name here that will be associated with this DHCP
pool.
Enter the starting IPv4 address that will be associated with the DHCP class in the
DHCP pool here.
Enter the ending IPv4 address that will be associated with the DHCP class in the
DHCP pool here.
Figure 4-32 DHCP Server Pool Settings (Edit Option) Window
Description
Enter the DHCP option number here. The range is from 1 to 254.
Select the DHCP option type here. Options to choose from are ASCII, HEX, and
IP. After selecting ASCII, enter the ASCII string in the space provided. This string
can be up to 255 characters long. After selecting HEX, enter the hexadecimal
string in the space provided. This string can be up to 254 characters long. Select
the None option to specify a zero-length hexadecimal string. After selecting IP,
enter the IPv4 address(es) in the space(s) provided. Up to 8 IPv4 address can be
56