Ptp Port Global Settings; Ptp Boundary Port Settings - D-Link DGS-3630 Series Reference Manual

Layer 3 stackable managed switch web ui reference guide
Hide thumbs Also See for DGS-3630 Series:
Table of Contents

Advertisement

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

PTP Port Global Settings

This window is used to display and configure the PTP interface settings.
To view the following window, click System > PTP (Precise Time Protocol) > PTP Port Global Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
State
Click the Apply button to accept the changes made.

PTP Boundary Port Settings

This window is used to display and configure the attributes of the PTP boundary clock. The configuration takes effect
when the PTP device is of the 'boundary' type.
To view the following window, click System > PTP (Precise Time Protocol) > PTP Boundary Port Settings, as
shown below:
Figure 3-21 PTP Port Global Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the PTP feature on the port(s) specified here.
26

Advertisement

Table of Contents
loading

Table of Contents