D-Link DGS-3630 Series Reference Manual page 433

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
iSCSI State
iSCSI CoS
Session Aging Time
Click the Apply button to accept the changes made.
The fields that can be configured in iSCSI Targets and TCP Ports are described below:
Parameter
iSCSI Target Port
IP Address
Target Name
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 7-29 iSCSI Settings Window
Description
Select to globally enable or disable the iSCSI awareness feature here.
Select the iSCSI CoS that will be configured here. Options to choose from are:
• VPT - Specifies to use VLAN Priority Tag (VPT) to assign iSCSI session
packets. Enter the VPT value in the space provided.
• DSCP - Specifies to use DSCP to assign iSCSI session packets. Enter the
DSCP value in the space provided.
• Default - Specifies to use the default settings. By default, the VPT is used
with the value of 7.
Select the Remark option to mark the iSCSI frames with the configured VPT or
DSCP when egressing the Switch.
Enter the session aging time value here. The range is from 1 to 43200 minutes.
This is used to configure the aging time for iSCSI sessions. When configuring the
aging time to be longer than the current setting, the current sessions will be timed
out and use the new aging time. When configuring the aging time to be shorter
than the current setting, sessions that are longer than the new aging time will be
deleted, and sessions that are shorter than or equal to the new aging time will be
continue to be monitored with the new setting. Select the Default option to use
the default value which is 5 minutes.
Description
Enter the iSCSI target port number here. The range is from 1 to 65535.
Enter the IP address of the iSCSI target here.
Enter the iSCSI target name here. This string can be up to 255 characters long.
The name can be manually configured, or obtained from iSNS or from a
sendTargets response. The initiator must present both its iSCSI Initiator Name
and the iSCSI Target Name to connect in the first login request of a new session
or connection.
421