D-Link DGS-3630 Series Reference Manual page 338

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
After clicking the Please Select button, the following page will appear.
Select the ACL and click the OK button to use the selected access list.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IP Multicast Route Settings
This window is used to display and configure the IP multicast route settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast Route
Settings, as shown below:
The fields that can be configured in Static Multicast Route Settings are described below:
Parameter
Source Address
Mask
RPF Address
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Route Table are described below:
Parameter
Summary
Figure 6-158 IP Multicast Global Settings (Please Select) Window
Figure 6-159 IP Multicast Route Settings Window
Description
Enter the network address of the multicast source here.
Specifies the network mask for the multicast source here.
Enter the RPF neighbor IP address to reach the network here. Selecting the
NULL option specifies that the RPF check will always fail for multicast traffic sent
from this source network.
Description
Selecting this option specifies to display a one-line, abbreviated summary of each
entry in the IP multicast routing table.
326