D-Link DGS-3630 Series Reference Manual page 446

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Delete button, next to the ACL rule, to remove the specific ACL rule.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
After clicking the Edit button, the fields that can be configured are described below:
Parameter
Start Sequence No.
Step
Counter State
Remark
Click the Apply button to accept the changes made.
After clicking the Add ACL button, the following page will appear.
After clicking the Add ACL button, the fields that can be configured are described below:
Parameter
ACL Type
Figure 8-9 ACL Access List (Edit) Window
Description
Enter the start sequence number here.
Enter the sequence number step here. The step range is from 1 to 32. This
specifies the number that the sequence numbers step. The default value is 10.
For example, if the increment (step) value is 5 and the beginning sequence
number is 20, the subsequent sequence numbers are 25, 30, 35, 40, and so on.
Select to enable or disable the counter state option here.
Enter an optional remark that will be associated with this ACL here.
Figure 8-10 ACL Access List (Add ACL) Window
Description
Select the ACL type that will be created here. Options to choose from are
434