D-Link DGS-3630 Series Reference Manual page 267

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in OSPF Area Settings are described below:
Parameter
VRF Name
OSPF Area ID
Range
NSSA
Stub
Area Range IP
Area Range Mask
Advertise
Click the Delete button to delete an entry based on the information entered.
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Area Table are described below:
Parameter
VRF Name
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry.
Click the VRF Name link (vrf1) to view more detailed settings about the entry.
Figure 6-58 OSPFv2 Area Settings Window
Description
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Select VRF button to select a pre-configured VRF instance that will
be used here.
Enter the OSPFv2 area ID here. The area will be created on an interface if the
subnet configured on the interface falls within the network range specified here.
Select this option to summarize OSPF routes at an Area Border Router (ABR).
Select this option to assign the OSPF area as a Not-So-Stubby Area (NSSA)
area.
Select this option to specify an OSPF area as a Stub Area.
Enter the OSPF area range IP address here.
Enter the OSPF area range subnet mask here.
Select the advertise option here. Options to choose from are Advertise and No-
Advertise.
• Advertise - Specifies to advertise a Type-3 summary Link-State
Advertisement (LSA) for the specified range of addresses.
• No-Advertise - Specifies to suppress the advertising of Type-3 summary
LSAs. Component routes are still hidden behind it.
Description
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Select VRF button to select a pre-configured VRF instance that will
be used here.
255