Ip Route Filter; Ip Prefix List Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Action
IP Address
Netmask
Click the Apply button to accept the changes made for each individual section.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IP Route Filter

IP Prefix List Settings

This window is used to create and configure an IP prefix list.
To view the following window, click L3 Features > IP Route Filter > IP Prefix List Settings, as shown below:
The fields that can be configured are described below:
Parameter
Prefix List Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the Clear Counter button to see the clear counter window.
Click the View Detail link to view more information regarding the specific entry.
Click the Edit button to re-configure the specific entry.
Click the Clear button to delete the information in the Description.
Figure 6-170 BGP Flap Statistics Table window
Description
Use the drop-down menu to display the IP or Network address.
Enter an IPv4 address to clear the dampening information.
Enter the netmask to clear the dampening information.
Figure 6-171 IP Prefix List Settings window
Description
Enter the name to identify the prefix list.
302