Queue Rate Limiting - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.

Queue Rate Limiting

This window is used to display and configure the queue rate limiting settings.
To view the following window, click QoS > Basic Settings > Queue Rate Limiting, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Queue ID
Rate Limit
Description
the space provided. This value must be between 8 and 10000000 kbps. Also,
enter the Burst Size value in the space provided. This value must be
between 0 and 128000 kilobytes.
• When Percent is selected, enter the input/output bandwidth percentage
value used in the space provided. This value must be between 1 and 100
percent (%). Also, enter the Burst Size value in the space provided. This
value must be between 0 and 128000 kilobytes.
• Select the None option to remove the rate limit on the specified port(s). The
specified limitation cannot exceed the maximum speed of the specified
interface. For the ingress bandwidth limitation, the ingress will send a pause
frame or a flow control frame when the received traffic exceeds the limitation.
Figure 7-6 Queue Rate Limiting Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the queue ID that will be configured here. Options to choose from are 0 to
7.
Select and enter the queue rate limit settings here.
• When the Min Bandwidth option is selected, enter the minimum bandwidth
rate limit value in the space provided. This value must be between 8 and
10000000 kbps. Also enter the maximum bandwidth (Max Bandwidth) rate
limit in the space provided. This value must be between 8 and 10000000
kbps.
When the minimal bandwidth is configured, the packet transmitted from the
queue can be guaranteed. When the maximum bandwidth is configured,
packets transmitted from the queue cannot exceed the maximum bandwidth
399