Authentication Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Authentication Settings

This window is used to display and configure the AAA network and EXEC authentication settings.
To view the following window, click Security > AAA > Authentication Settings, as shown below:
The fields that can be configured in AAA Authentication 802.1X are described below:
Parameter
Status
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
The fields that can be configured in AAA Authentication MAC-Auth are described below:
Parameter
Status
Method 1 ~ Method 4
Figure 9-23 Authentication Settings Window
Description
Select to enable or disable the AAA 802.1X authentication state here.
Select the method lists that will be used for this configuration here. Options to
choose from are:
• none - Normally, the method is listed as the last method. The user will pass
authentication if it is not denied by previous method authentication.
• local - Specifies to use the local database for authentication.
• group - Specifies to use the server groups defined by the AAA group server.
Enter the AAA group server name in the space provided. This string can be
up to 32 characters long.
• radius - Specifies to use the servers defined by the RADIUS server host
command.
Description
Select to enable or disable the AAA MAC authentication state here.
Select the method lists that will be used for this configuration here. Options to
choose from are:
• none - Normally, the method is listed as the last method. The user will pass
authentication if it is not denied by previous method authentication.
469