Qos Pfc; Network Qos Class Map - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Unit
From Port - To Port
Direction
Policy Map Name
Click the Apply button to accept the changes made.

QoS PFC

Network QoS Class Map

This window is used to display and configure the network Quality of Service (QoS) Priority-based Flow Control (PFC)
class map settings.
To view the following window, click QoS > QoS PFC > Network QoS Class Map, as shown below:
The fields that can be configured are described below:
Parameter
Network QoS Class
Map Name
Click the Apply button to accept the changes made.
Click the Match button to configure the match rule settings for the map name.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Match button, the following page will appear.
The fields that can be configured are described below:
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the direction option here. Options to choose from are Input and Output.
Input specified ingress traffic and output specifies egress traffic.
Enter the policy map name here. This name can be up to 32 characters long.
Select the None option to not tie a policy map to this entry.
Figure 7-20 Network QoS Class Map Window
Description
Enter the network QoS class map name to be associated with a traffic policy here. This
name can be up to 32 characters long.
Figure 7-21 Network QoS Class Map (Match) Window
413