D-Link DGS-3630 Series Reference Manual page 339

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Static
Multicast Protocol
Group Address
Source Address
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
IP Multicast RPF Table
This window is used to display Reverse Path Forwarding (RPF) information for a given unicast host address.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast RPF Table,
as shown below:
The fields that can be configured are described below:
Parameter
IP Address
Click the Find button to locate a specific entry based on the information entered.
IP Multicast Forwarding Cache
This window is used to display the content of the IP multicast routing forwarding cache database.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast
Forwarding Cache, as shown below:
Description
Selecting this option specifies to display the multicast static routes.
Select this option and then select the multicast protocol that will be used in this
display here. Options to choose from are PIM-DM, PIM-SM, and DVMRP.
• PIM-DM - Specifies to display only the PIM-DM routes.
• PIM-SM - Specifies to display only the PIM-SM routes.
• DVMRP - Specifies to display only the DVMRP routes.
Select and enter the multicast group IP address here.
Enter the multicast source IP address here.
Figure 6-160 IP Multicast RPF Table Window
Description
Enter the unicast host IPv4 address here.
Figure 6-161 IP Multicast Forwarding Cache Window
327