System Log Discriminator Settings - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
The fields that can be configured for Buffer Log Settings are described below:
Parameter
Buffer Log State
Severity
Discriminator Name
Write Delay
Click the Apply button to accept the changes made.

System Log Discriminator Settings

This window is used to display and configure the system log discriminator settings.
To view the following window, click System > System Log > System Log Discriminator Settings, as shown below:
The fields that can be configured are described below:
Parameter
Discriminator Name
Action
Severity
Click the Apply button to accept the changes made.
Description
Select to globally enable or disable the buffer log state here. Options to choose
from are Enable, Disabled, and Default. When selecting the Default option, the
global buffer log state will follow the default behavior.
Select the severity value of the type of information that will be logged. Options to
choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Enter the discriminator name used here. This name can be up to 15 characters
long. This specifies the name of the discriminator profile that will be used to filter
buffer log messages based on the filtering criteria specified within that profile.
Enter the log write delay value here. This value must be between 0 and 65535
seconds. By default, this value is 300 seconds. Tick the Infinite option, to disable
the write delay feature.
Figure 3-18 System Log Discriminator Settings Window
Description
Enter the name of the discriminator profile here. This name can be up to 15
characters long.
Select the facility behavior option and the type of facility that will be associated
with the selected behavior here. Behavior options to choose from are Drops and
Includes.
Select the severity behavior option and the value of the type of information that
will be logged. Behavior options to choose from are Drops and Includes. Severity
value options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3
(Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
25