System Log Discriminator Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Severity
Discriminator Name
Click the Apply button to accept the changes made.
The fields that can be configured for Monitor Log Settings are described below:
Parameter
Monitor Log State
Severity
Discriminator Name
Click the Apply button to accept the changes made.

System Log Discriminator Settings

This window is used to display and configure the system log discriminator settings.
To view the following window, click System > System Log > System Log Discriminator Settings, as shown below:
The fields that can be configured are described below:
Parameter
Discriminator Name
Description
Select the severity value of the type of information that will be logged. Options
to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Enter the discriminator name used here. This name can be up to 15 characters
long. This specifies the name of the discriminator profile that will be used to
filter console log messages based on the filtering criteria specified within that
profile.
Description
Select to globally enable or disable the monitor log state here.
Select the severity value of the type of information that will be logged. Options
to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Enter the discriminator name used here. This name can be up to 15 characters
long. This specifies the name of the discriminator profile that will be used to
filter monito log messages based on the filtering criteria specified within that
profile.
Figure 3-19 System Log Discriminator Settings Window
Description
Enter the name of the discriminator profile here. This name can be up to 15
characters long.
21