System Log; System Log Settings; System Log Server Settings - D-Link Dis-200G Series Web Ui Reference Manual

System Log

System Log Settings

This window is used to view and configure the system's log settings.
To view the following window, click System > System Log > System Log Settings, as shown below:
The fields that can be configured for Global State are described below:
Parameter
System log
Click the Apply button to accept the changes made.
The fields that can be configured for Buffer Log Settings are described below:
Parameter
Buffer Log State
Click the Apply button to accept the changes made.

System Log Server Settings

This window is used to view and configure system log's server settings.
To view the following window, click System > System Log > System Log Server Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Host IPv4 Address
UDP Port
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 4-11 System Log Settings window
Description
Select this option to enable or disable the global state.
Description
Select whether the enable or disable the buffer log's global state.
Figure 4-12 System Log Server Settings window
Description
Enter the system log server's IPv4 address here.
Enter the system log server's UDP port number here. This value
must be 514 or between 1024 and 65535. By default, this value is
514.
27