System Log Configuration; System Log Settings; System Log Server Settings - D-Link DGS-3000 Series Reference Manual

Log State
High Threshold (-500-500)
Low Threshold (-500-500)
Click the Apply button to implement changes made.

System Log Configuration

System Log Settings

The Switch allows users to choose a method for which to save the switch log to the flash memory of the Switch.
To view the following window, click System Configuration > System Log Configuration > System Log Settings as
shown below:
The fields that can be configured are described below:
Parameter
System Log
Save Mode
Click the Apply button to accept the changes made for each individual section.

System Log Server Settings

The Switch can send System log messages to up to four designated servers using the System Log Server.
To view the following window, click System Configuration > System Log Configuration > System Log Server
Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
temperature setting.
Use the drop-down menu to enable or disable the log state option of the warning
temperature setting.
Enter the high threshold value of the warning temperature setting.
Enter the low threshold value of the warning temperature setting.
Figure 2-21 System Log Settings window
Description
Use the radio buttons to enable or disable the system log settings.
Use the drop-down menu to choose the method for saving the switch log to the flash
memory. The user has three options:
On Demand – Users who choose this method will only save log files when they manually
tell the Switch to do so, either using the Save Log link in the Save folder.
Time Interval – Users who choose this method can configure a time interval by which the
Switch will save the log files, in the box adjacent to this configuration field. The user may
set a time between 1 and 65535 minutes.
Log Trigger – Users who choose this method will have log files saved to the Switch
every time a log event occurs on the Switch.
26