System Log Configuration; System Log Settings; System Log Server - D-Link DAS-3626 User Manual

System Log Configuration

This section contains information for configuring various attributes and properties for System Log Configurations,
including System Log Settings and System Log Host.

System Log Settings

This window allows the user to enable or disable the System Log and specify the System Log Save Mode Settings.
To view this window, click System Configuration > System Log Settings as shown below:
The following parameters can be set:
Parameter
System Log
Save Mode
Minutes (1-65535)
To add a new entry, enter the appropriate information and click Apply.

System Log Server

The switch can send Syslog messages to up to four designated servers using the System Log Server.
To view this window, click System Configuration > System Log Configuration > System Log Server as shown
below:
DAS-3626 VDSL2 Switch User Manual
Figure 27. System Log Settings menu
Description
To activate the System Log select Enabled or Disabled.
Use this drop-down menu to specify the method that will trigger a log entry. You can choose
between On Demand, Time Interval and Log Trigger.
On Demand – This method will only save log files when they manually tell the switch to do so,
using the Save Log link in the Save folder.
Time Interval – This method configures a time interval by which the switch will save the log
files. The user may set a time between 1 and 65535 minutes.
Log Trigger – This method will save log files to the switch every time a log event occurs on the
switch.
Enter a time interval, in minutes, for which you would like a log entry to be made.
Figure 28. System Log Server menu
24