Table of Contents
Advertisement
®
xStack
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
High Threshold
Low Threshold
Click the Apply button to accept the changes made.
System Log Configuration
System Log Settings
The Switch allows users to choose a method for which to save the switch log to the flash memory of the Switch.
To view the following window, click System Configuration > System Log Configuration > System Log
Settings, as shown below:
The fields that can be configured are described below:
Parameter
System Log
Save Mode
Click the Apply button to accept the changes made.
System Log Server Settings
The Switch can send Syslog messages to up to four designated servers using the System Log Server.
To view the following window, click System Configuration > System Log Configuration > System Log Server
Settings, as shown below:
setting.
Here the user can enter the high threshold value of the warning temperature setting.
Here the user can enter the low threshold value of the warning temperature setting.
Figure 2-17 System Log Settings window
Description
Here the user can enable or disable the system log settings. Select Enable or Disable
and click to Apply button to accept the changes made.
Use the pull-down menu to choose the method for saving the switch log to the flash
memory. The user has three options:
Time Interval – Users who choose this method can configure a time interval by which
the Switch will save the log files, in the box adjacent to this configuration field. The
user may set a time between 1 and 65535 minutes.
On Demand – Users who choose this method will only save log files when they
manually tell the Switch to do so, either using the Save Log link in the Save folder or
clicking the Save Log Now button on this window.
Log Trigger – Users who choose this method will have log files saved to the Switch
every time a log event occurs on the Switch.
17
Advertisement
Table of Contents
