Snmpv1/V2 User And Group Names; Create Snmp V1/V2 User And Group Names; Figure 95. User/Group Page - Allied Telesis AT-GS950/24 User Manual

SNMPv1/v2 User and Group Names

Create SNMP v1/
v2 User and
Group Names
A v1/v2 User Name and Group Name definition is the basis for creating
SNMPv1/v2 communities. You can create and delete User and Group
Names with the procedures in the following sections:
"Create SNMP v1/v2 User and Group Names" on page 269

"Modify SNMPv1/v2 User and Group Names" on page 270

"Delete SNMPv1/v2 User and Group Names" on page 270

A community string has attributes for controlling who can use the string
and what the string will allow a network management station to do on the
switch.
The AT-S109 Version 1.1.0 Management software does NOT provide any
default community strings. You must first define an SNMP User and Group
Name on the SNMP User/Group page and then define a Community
Name on the SNMP Community Table page.
To create an SNMP User and Group Name, perform the following
procedure:
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select User/Group.
The User/Group Page is displayed in Figure 95.

Figure 95. User/Group Page

AT-GS950/24 Web Interface User Guide
269