---
2 mac address(es) found
# Display only the count of the secure MAC addresses.
<Sysname> display port-security mac-address security count
This operation may take a few minutes, please wait......
---
2 mac address(es) found
# Display information about secure MAC addresses in VLAN 1.
<Sysname> display port-security mac-address security vlan 1
MAC ADDR
0002-0002-0002
000d-88f8-0577
---
2 mac address(es) found
# Display information about secure MAC addresses on port GigabitEthernet 3/0/1.
<Sysname> display port-security mac-address security interface gigabitethernet 3/0/1
MAC ADDR
000d-88f8-0577
---
1 mac address(es) found
# Display information about secure MAC addresses of port GigabitEthernet 3/0/1 in VLAN 1.
<Sysname> display port-security mac-address security interface gigabitethernet 3/0/1 vlan
1
MAC ADDR
000d-88f8-0577
---
1 mac address(es) found
Table 24 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME
x mac address(es) found
Related commands
port-security mac-address security
port-security authorization ignore
Use port-security authorization ignore to configure a port to ignore the authorization information
received from the server (an RADIUS server or the local device).
---
---
VLAN ID
STATE
1
Security
1
Security
---
VLAN ID
STATE
1
Security
---
VLAN ID
STATE
1
Security
---
Description
Secure MAC address.
ID of the VLAN to which the port belongs.
Type of the MAC address added. "Security" means it is a secure MAC
address.
Port to which the secure MAC address belongs.
Period of time before the secure MAC address ages out. "NOAGED"
is displayed for secure MAC addresses.
Number of secure MAC addresses stored.
PORT INDEX
GigabitEthernet3/0/1
GigabitEthernet3/0/1
PORT INDEX
GigabitEthernet3/0/1
PORT INDEX
GigabitEthernet3/0/1
196
AGING TIME
NOAGED
NOAGED
AGING TIME
NOAGED
AGING TIME
NOAGED