Field
UIM Status
display cellular-ethernet
Use display cellular-ethernet to display call connection information for a 3G/4G modem in Ethernet
mode.
Syntax
display cellular-ethernet interface-number all [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays all the call connection information for the 3G/4G modem.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display call connection information for a 3G/4G modem in Ethernet mode (WCDMA mode).
<Sysname> display cellular-ethernet 0/0 all
Modem State:
Hardware Information
====================
Model = E176G
Modem Firmware Version = 11.124.05.04.112
Hardware Version = CD25TCPV
International Mobile Subscriber Identity (IMSI) = 460016004345081
International Mobile Equipment Identity (IMEI) = 357267023325644
Factory Serial Number (FSN) =
Modem Status = Online
Profile Information
====================
Profile 1 = ACTIVE
Description
UIM card status:
•
OK—The UIM card is normal.
•
Network Reject—The UIM card is denied access to the
network. The cellular interface is unavailable.
•
Not Insert—The UIM card is absent. The cellular interface
is unavailable.
GB5TAA1981305641
83