Priority Mapping Commands; Priority Mapping Table Commands; Display Qos Map-Table - HP HSR6800 Command Reference Manual

Priority mapping commands

The commands in this chapter are supported only on SAP modules operating in bridge mode.

Priority mapping table commands

display qos map-table

Use display qos map-table to display the configuration of a priority mapping table.
Syntax
display qos map-table [ dot1p-dp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
dot1p-dp: 802.1p-to-drop mapping table.
dot1p-lp: 802.1p-to-local mapping table.
dscp-dot1p: DSCP-to-802.1p mapping table.
dscp-dp: DSCP-to-drop mapping table.
dscp-dscp: DSCP-to-DSCP mapping table.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no priority mapping table is specified, this command displays the configuration information of all
priority mapping tables. If no direction is specified, this command displays the priority mapping tables
in any direction.
Examples
# Display the configuration of the 802.1p-to-local mapping table.
<Sysname> display qos map-table dot1p-lp
MAP-TABLE NAME: dot1p-lp
IMPORT :
TYPE: pre-define
EXPORT
68