Installing a GPS antenna
1.
Attach one end of the antenna to the GPS antenna connector on the router, as shown in Figure 22.
Avoid over-tightening.
2.
Attach the magnetic end of the antenna to a metal media near the router.
Figure 22 Installing a GPS antenna
Connecting interface cables
This section uses the Ethernet cable for example.
Because fixed Ethernet ports support MDI/MDIX autosensing, you can use either a straight-through cable
or a crossover cable for connection.
To connect an Ethernet cable:
1.
Connect one end of the cable to an Ethernet port on the router.
2.
Connect the other end of the cable to the peer device.
3.
Examine the port LED status. For more information, see "LED description."
Figure 23 Connecting the router to a computer
17