Table of Contents
Advertisement
Grounding the router to a buried grounding conductor
If the installation site has no grounding strips but offers the option of grounding to earth, hammer a
0.5 m (1.64 ft) or longer angle iron or steel tube into the earth to serve as a grounding conductor, as
shown in
Figure
Figure 18 Grounding to a conductor buried in the earth
1
2
(1) Earth
Installing an antenna
CAUTION:
Do not touch the antenna top, especially after the antenna is connected with the grounding contact.
Otherwise ESD may damage the router.
To ensure signal quality, use antennae supplied with the router.
To install an antenna:
1.
Adjust the angle of the antenna to 180º.
2.
Attach the antenna to the router, as shown in
The antenna must be vertical to the ground or ceiling to achieve the optimal coverage.
Figure 19 Installing an antenna
1
Connecting interface cables
Before powering on the router, connect the router's interface cables.
Connecting an Ethernet cable
The router includes WAN and LAN Ethernet ports.
18.
3
(2) Joint
Figure
19. Avoid over-tightening.
2
15
(3) Angle iron
Advertisement
Table of Contents
