Igmp Snooping Commands; Introduction; Chapter 22: Igmp Snooping Commands - Allied Telesis CentreCOM GS948MPX Command Reference Manual

22

Introduction

Overview Devices running AlliedWare Plus use IGMP (Internet Group Management Protocol)
and MLD (Multicast Listener Discovery) to track which multicast groups their clients
belong to. This enables them to send the correct multimedia streams to the correct
destinations. IGMP is used for IPv4 multicasting, and MLD is used for IPv6
multicasting.
This chapter describes the commands to configure IGMP Snooping.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50181-01 Rev B
IGMP Snooping
"clear ip igmp" on page 721
"clear ip igmp group" on page 722
"clear ip igmp interface" on page 723
"debug igmp" on page 724
"ip igmp flood specific-query" on page 725
"ip igmp maximum-groups" on page 726
"ip igmp snooping" on page 728
"ip igmp snooping fast-leave" on page 729
"ip igmp snooping mrouter" on page 730
"ip igmp snooping querier" on page 731
"ip igmp snooping report-suppression" on page 732
"ip igmp snooping routermode" on page 733
"ip igmp snooping source-timeout" on page 735
"ip igmp snooping tcn query
"ip igmp static-group" on page 738
"ip igmp trusted" on page 740
"ip igmp version" on page 741
Command Reference for GS900MX Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Commands
solicit" on page 736
719