Chapter 23: Internet Group Management Protocol (Igmp) Snooping Commands - Allied Telesis AT-GS900M Series User Manual

Chapter 23
Internet Group Management Protocol
(IGMP) Snooping Commands
"ADD IGMPSNOOPING
MCGROUP" on page 418
"DELETE IGMPSNOOPING" on
page 421
"DISABLE IGMPSNOOPING" on
page 422
"ENABLE IGMPSNOOPING" on
page 423
"SET IGMPSNOOPING" on
page 424
"SET IGMPSNOOPING
MCGROUP" on page 426
"SHOW IGMPSNOOPING" on
page 427
Section IV: Security and Traffic Control
The IGMP Snooping commands are summarized in Table 48.
Table 48. IGMP Snooping Commands
Command
AT-GS900M Series CLI Reference
Description
Add a multicast group for IGMP Snooping.
Deletes a static multicast group address.
Disables IGMP Snooping.
Enables IGMP Snooping.
Specifies the timeout and changes the
settings of the multicast group.
Changes the router ports for the multcast
group.
Displays the settings and status of IGMP
Snooping.
417