Low Current Setting Level; Low Current Detection Time; Treatment For Low Current - Delta C2000 series User Manual

Seven fault

Low Current Setting Level

Settings

Low Current Detection Time

Settings

Treatment for low current

Settings
 The drive will operate as the setting of Pr.06-73 when output current is lower than the setting of
Pr.06-71 and when low current continues for a period longer than the setting of Pr.06-72. This
parameter can also be used with external multi-function output terminal 44 (MO44) for low current
output.
 The low current detection function will not be executed when drive is at sleep or standby status.
Pr.06-18 ovd
Pr.06-19 ovA
Pr.06-17 ocS
Pr.06-18 ocA
Pr.06-19 ocA
Pr.06-20 ovA
Pr.06-21 ovd
Pr.06-22 ovA
0.0 ~ 6553.5 %
0.00 ~ 655.35 sec
0 : No function
1 : warn and coast to stop
2 : warn and ramp to stop by 2
3 : warn and operation continue
12-
Chapter 12 Description of Parameter SettingsC2000 Series
Pr.06-64 3482
Pr.06-65 3000
Pr.06-63 12
Pr.06-64 5824
Pr.06-65 5003
Pr.06-66 4051
Pr.06-67 3482
Pr.06-68 3000
nd
deceleration time
121
(12-5824)+64800=58988 min
ocS occurs at 58988 min after
last fault (ocA)
Factory Setting: 0.0
Factory Setting: 0.00
Factory Setting: 0