Reset Canopen Index; Canopen Master Function/Ascii Mode; Identifications For Communication Card; Firmware Version Of Communication Card - Delta C2000 series User Manual

Reset CANopen Index

Settings: bit0: reset address 20XX to 0
Reserved
CANopen Master Function
Settings
CANopen Master Address
Settings
~ Reserved

Identifications for Communication Card

Settings

Firmware Version of Communication Card

Settings
Product Code
Settings
 Different communication cards have their own product codes with different value.
DeviceNet: As it connects to different kind of motor drive, it will have different product code.
bit1: reset address 264X to 0
bit2: reset address 26AX to 0
bit3: reset address 60XX to 0
0: Disable
1: Enable
1~127
0: No communication card
1: DeviceNet Slave
2: Profibus-DP Slave
3: CANopen Slave/Master
4: Modbus-TCP Slave
5: EtherNet/IP Slave
6~8: Reserved
Read only
Read only
Chapter 12 Description of Parameter SettingsC2000 Series
159
Factory Setting: 65535
Factory Setting: 0
Factory Setting: 100
Factory Setting: ##
Factory Setting: ##
Factory Setting: ##