Delta C2000 series User Manual page 39

Remove the crate cover, EPEs and manual.
Loosen the 6 screws on the top then remove 6
metal washers and 6 plastic washers as shown in
figure below.
Lift the drive by hooking the lifting hole. It is now
ready for installation.
Chapter 3 UnpackingC2000 Series
Remove the crate cover, EPEs, rubbers and
manual.
Loosen the 6 screws on the top then remove 6
metal washers and 6 plastic washers as shown in
figure below.
Loosen 6 of the M6 screws on the side and remove
the 2 plates, as shown in below. The removed
screws and plates can be used to secure the AC
motor drive from the external.
3-7