Chapter 12 Description of Parameter SettingsC2000 Series
Reset Communication Card
Settings
Additional Setting for Communication Card
Settings
Status of Communication Card
Settings
0: Disable
1: Reset, return to factory setting
Bit 0: Enable IP Filter
Bit 1: Internet parameters enable(1bit)
When IP address is set up, this bit need to be enabled to write down the
parameters. This bit will change to disable when it finishes saving the
update of internet parameters.
Bit 2: Login password enable(1bit)
Enable login password (1bit). This bit will be changed to disable when it
finishes saving the update of internet parameters.
Bit 0: password enable
When the communication card is set with password, this bit is enabled.
When the password is clear, this bit is disabled.
162
Factory Setting: 0
Factory Setting: 1
Factory Setting: 0