Up/Down Key Mode; Constant Speed. The Accel. /Decel. Speed Of The Up/Down Key; Digital Input Response Time - Delta C2000 series User Manual

Classical field oriented control ac motor drive

Hide thumbs Also See for C2000 series:

Table of Contents

57~70 Reserved

UP/DOWN Key Mode

 These settings are used when multi-function input terminals are set to 19/20. Refer to Pr.02-09 and

02-10 for the frequency up/down command.

 Pr.02-09 set to 0: it will increase/decrease frequency command (F) by the external terminal

UP/DOWN key as shown in the following diagram. In this mode, it also can be controlled by

UP/DOWN key on the digital keypad.

External ter minal

 Pr.02-09 set to 1: it will increase/decrease frequency command (F) by the setting of

acceleration/deceleration (Pr.01-12~01-19) and only be valid during operation.

Mu lti -fu ncti on

i np ut te rmi na l

1 0 Fr eq ue ncy

i ncr ea sed comma nd

 This parameter is used to set the response time of digital input terminals FWD, REV and MI1~MI8.

 It is used for digital input terminal signal delay and confirmation. The delay time is confirmation time

0: Up/down by the accel/decel time

1: Up/down constant speed (Pr.02-10)

0.01~1.00Hz/ms

F requenc y c ommand

Fr eq ue ncy

0.000~30.000 sec

Chapter 12 Description of Parameter SettingsC2000 Series

Descriptions

Fr eq ue ncy

In cre ase d b y acce le ra tio n ti me

Factory Setting: 0

Factory Setting: 0.01

Factory Setting: 0.005