Delta C2000 series User Manual page 70

Chapter 6 Control TerminalsC2000 Series
Terminals
Multi-function Output 2
MO2
(photocoupler)
MCM Multi-function Output Common
Multi-function relay output 1
RA1
(N.O.) a
Multi-function relay output 1
RB1
(N.C.) b
Multi-function relay common
RC1
Multi-function relay output 2
RA2
(N.O.) a
Multi-function relay output 2
RB2
(N.C.) b
Multi-function relay common
RC2
Potentiometer power supply
+10V
Potentiometer power supply
-10V
Analog voltage input
AVI
Analog current input
ACI
Auxiliary analog voltage input
AUI
AFM1
Terminal Function
+10V AVI circuit
AVI
ACM
internal circuit
ACI
ACI circuit
internal circuit
ACM
+10
AU I cir cuit
~
- 10V
AUI
ACM
internal cir cuit
Factory Setting (NPN mode)
Max 48Vdc 50mA
Resistive Load:
5A(N.O.)/3A(N.C.) 250VAC
5A(N.O.)/3A(N.C.) 30VDC
Inductive Load (COS 0.4):
2.0A(N.O.)/1.2A(N.C.) 250VAC
2.0A(N.O.)/1.2A(N.C.) 30VDC
These terminals are to output monitoring signals, such
as drive in operation, frequency attained or overload
indication.
Note: RA1 and RA2 have N.O. and N.C..
Analog frequency setting: +10Vdc 20mA
Analog frequency setting: -10Vdc 20mA
Impedance: 20kΩ
Range: 0~20mA/4~20mA/0~10V =0~Max. Output
Frequency (Pr.01-00)
AVI switch, factory setting is 0~10V
Impedance: 250Ω
Range: 0~20mA/4~20mA/0~10V= 0 ~ Max. Output
Frequency (Pr.01-00)
ACI Switch, factory setting is 4~20mA
Impedance: 20kΩ
Range: -10~+10VDC=0 ~ Max. Output
Frequency(Pr.01-00)
0~10V
Max. output current 2mA,
-10~10V
maximum output current 2mA,
Output current: 2mA max
Resolution: 0~10V corresponds to Max. operation
6-4
MO1
MO2
MCM
Max. load 5kΩ
maximum load 5kΩ