8. When Y=2, X=5
Homing by Frequency 1
Settings
Homing by Frequency 2
Settings
Control by Multi-funcion Input Terminal Pr. 02-01~02-08 (44~47).
44: Reverse direction homing
45: Forward direction homing
46: Homing (ORG)
47: Homing function enabled
If the drive is not control by CAN or PLC, set Pr.00-10 =1 (Contorl mode = P2P position control) and
set external output terminal to 47 (homing function enable) for homing.
When Pr.00-10 is set to 3, after homing is complete, user must set control mode setting Pr.00-10 to
1 in order to perform P2P position control.
~
Reserved
Display Filter Time (Current)
Settings: 0.001~65.535 sec
Set this parameter to minimize the current fluctuation displayed by digital keypad.
Display Filter Time (Keypad)
Settings: 0.001~65.535 sec
Set this parameter to minimize the display value fluctuation displayed by digital keypad.
Software Version (date)
Settings: Read only
This parameter displays the drive's software version by date.
Reserve
~
Speed
Z pulse
0.00~600.00Hz
0.00~600.00Hz
Chapter 12 Description of Parameter SettingsC2000 Series
Position
12-21
Factory Setting: 8.00
Factory Setting: 2.00
Factory Settings: 0.100
Factory Settings: 0.100
Factory Settings: ####