Frequency Command For Malfunction; Output Frequency/Voltage/Current At Malfunction; Dc Voltage At Malfunction; Igbt Temperature At Malfunction - Delta C2000 series User Manual

 It is used to set the PTC level, and the corresponding value for 100% is max. analog input value.

Frequency Command for Malfunction


Settings
 When malfunction occurs, use can check the frequency command. If it happens again, it will
overwrite the previous record.
Output Frequency at Malfunction
Settings
 When malfunction occurs, use can check the current frequency command. If it happens
again, it will overwrite the previous record.
Output Voltage at Malfunction
Settings
 When malfunction occurs, user can check current output voltage. If it happens again, it will
overwrite the previous record.

DC Voltage at Malfunction

Settings
 When malfunction occurs, user can check the current DC voltage. If it happens again, it will
overwrite the previous record.
Output Current at Malfunction
Settings
 When malfunction occurs, user can check the current output current. If it happens again, it will
overwrite the previous record.

IGBT Temperature at Malfunction

Settings
 When malfunction occurs, user can check the current IGBT temperature. If it happens again, it will
overwrite the previous record.
Capacitance Temperature at Malfunction
Settings
 When malfunction occurs, user can check the current capacitance temperature. If it happens again,
it will overwrite the previous record.
Motor Speed in rpm at Malfunction
0.00~655.35Hz
0.00~655.35Hz
0.0~6553.5V
0.0~6553.5V
0.00~655.35Amp
0.0~6553.5℃
0.0~6553.5℃
12-
Chapter 12 Description of Parameter SettingsC2000 Series
111
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only