Drive Stops - Delta C2000 series User Manual

Display Fault code
Fault Fault
EoL2 EF
Thermal relay 2 External Fault
Fault Fault
EoL2 EF1
Thermal relay 2 Emergency stop
Fault Fault
EoL2 bb
Base block Thermal relay 2
Fault Fault
EoL2 Pcod
Password Error Thermal relay 2
Fault Fault
EoL2 ccod
Thermal relay 2 SW code Error
Fault Fault
EoL2 cE1
Thermal relay 2 Modbus CMD err
Fault Fault
cE2
Modbus ADDR err Thermal relay 2
Fault Fault
cE3
Thermal relay 2 Modbus DATA err
Fault Fault
cE4
Modbus slave FLT Thermal relay 2
Fault Fault
cE10
Modbus time out Thermal relay 2
External Fault
When input EF (N.O.) on external
0031H
terminal is closed to GND, AC motor
drive stops output U, V, and W.
Emergency stop
When the multi-function input terminals
0032H MI1 to MI6 are set to emergency stop,
the AC motor drive stops output U, V, W
and the motor coasts to stop.
External Base Block
When the external input terminals MI1 to
0033H
MI16 are set as bb and active, the AC
motor drive output will be turned off
Password will be locked if three fault
0034H
passwords are entered
0035H Software error
0036H Illegal function code
0037H Illegal data address (00H to 254H)
0038H Illegal data value
0039H Data is written to read-only address
003AH Modbus transmission timeout.
15-31
Chapter 15 CANopen Overview C2000 Series
Description
CANopen
CANopen fault
fault code register
(bit 0~7)
9000H 5
9000H 5
9000H 5
FF26H 5
6100H 5
7500H 4
7500H 4
7500H 4
7500H 4
7500H 5