Other Command
Commands
NOP
INV
P
16.6.2 Explanation for the Command
Mnemonic
Load A contact
LD
X0~X17
Operand
L The LD command is used on the A contact that has its start from the left BUS or
the A contact that is the start of a contact circuit. Function of the command is to
save present contents, and at the same time, save the acquired contact status
into the accumulative register.
Ladder diagram
Example
X0
Mnemonic
Load B contact
LDI
X0~X17
Operand
The LDI command is used on the B contact that has its start from the left BUS or
the B contact that is the start of a contact circuit. Function of the command is to
save present contents, and at the same time, save the acquired contact status
into the accumulative register.
Ladder diagram:
Example
X0
Function
No function
Inverse operation result
Indicator
Y0~Y17
M0~M799
X1
Y1
Y0~Y17
M0~M799
X1
Y1
16-35
Chapter 16 PLC Function C2000 Series
Function
T0~159
Command code
LD
X0
AND
X1
OUT
Y1
Function
T0~159
Command code:
LDI
X0
AND
X1
OUT
Y1
Operands
--
--
P
C0~C79
D0~D399
-
Operation
Load contact A of X0
Connect to contact A of
X1 in series
Drive Y1 coil
C0~C79
D0~D399
-
Operation:
Load contact B of X0
Connect to contact A of
X1 in series
Drive Y1 coil