Recovery Time To Pr.07-11 - Delta C2000 series User Manual

Classical field oriented control ac motor drive

Hide thumbs Also See for C2000 series:

Table of Contents

Chapter 12 Description of Parameter SettingsC2000 Series

Recovery Time to Pr.07-11 (# of automatic reboots after fault)

 When a reset/restart after fault occurs, the drive will regards Pr.07-33 as a time boundary and

beging counting the numbers of faults occur within this time period. Within the period, if numbers

of faults occurred did not exceed the setting in Pr.07-11, the counting will be cleared and starts

from 0 when next fault occurs. However, if the numbers of faults occurred within this time period

have exceed the setting in Pr.07-11, user will need to press RESET key manually for the drive to

operate again.

00~6000.0 sec

Factory Setting:60.0