JOG Frequency
Settings
Both external terminal JOG and key "F1" on the keypad KPC-CC01 can be used. When the jog
command is ON, the AC motor drive will accelerate from 0Hz to jog frequency (Pr.01-22). When the
jog command is OFF, the AC motor drive will decelerate from Jog Frequency to zero. The Jog
Accel./Decel. time (Pr.01-20, Pr.01-21) is the time that accelerates from 0.0Hz to Pr.01-22 JOG
Frequency.
The JOG command can't be executed when the AC motor drive is running. In the same way, when
the JOG command is executing, other operation commands are invalid except forward/reverse
commands and STOP key on the digital keypad.
It does not support JOG function in the optional keypad KPC-CE01.
1st/4th Accel./decel. Frequency
Settings
The transition from acceleration/deceleration time 1 to acceleration/deceleration time 4, may also be
enabled by the external terminals. The external terminal has priority over Pr. 01-23.
When using this function, please set S-curve acceleration time as 0 if 4
short.
01-23
S-curve Acceleration Begin Time 1
Frequency
01-00
Max. O utput
Frequency
Frequency
Setting
accel. time
01-12,14,16,18,20
0.00~600.00Hz
0.00~600.00Hz
F reque nc y
1st Acceler ati on
Time
4th A cceleration
Time
1st/4th A cceleration/Dec eleration F requenc y S witchi ng
Chapter 12 Description of Parameter SettingsC2000 Series
decel. time
01-13,15,17,19,21
Accel./Decel. Time
4th Dec eleration
T ime
1s t Dec eleration
12-28
Time
Factory Setting: 6.00
Factory Setting: 0.00
th
acceleration time is set too
T ime
Ti me