Display The Frequency Command Executed By External Terminal; Multi-Function Output Terminal: Function 42: Brake Frequency Checking Point - Delta C2000 series User Manual
Classical field oriented control
ac motor drive
Hide thumbs
Also See for C2000 series:
- User manual (936 pages) ,
- Manual (22 pages) ,
- Product application (5 pages)
Table of Contents
Advertisement
Weights
Bit
Display the Frequency Command Executed by External Terminal
Settings
When the source of frequency command comes from the external terminal, if Lv or Fault occurs at
this time, the frequency command of the external terminal will be saved in this parameter.
Reserved
Reserved
Multi-function output terminal: Function 42: Brake Current Checking Point
Settings
Multi-function output terminal: Function 42: Brake Frequency Checking Point
Settings
Pr02-32, Pr02-33, Pr02-34, Pr02-57 and Pr02-58 can be applied on setting up cranes. (Choose
crane action #42 to set up multi-functional output Pr02-13, Pr02-14, Pr02-16, and Pr02-17)
When output current of a drive is higher than the setting of Pr02-33 Pivot Point of the Current
(>=02-33) and when output frequency is higher than the setting of Pr02-34 Pivot Point of the
Frequency (>= 02-34), choose #42 to set up Multi-functional output Pr02-13, Pr02-14, Pr02-16 and
Pr002-17 after the delay time set at Pr02-32.
When the Pivot Point of the Current 's setting 02-57≠0 and when the output current of the drive is
lower than the setting of Pr02-57 (<02-57), or when the output frequency is lower than the setting of
Pr02-58 (<02-58), the disable the setting #42 of the multi-functional output Pr02-13, Pr02-14,
Pr02-16, Pr02-17
When Pr02-57 = 0, the output current is lower than setting of Pr02-33 Pivot Point of the current
(<02-33) or when output frequency is lower than the setting of Pr02-58(<02-58), disable the setting
of #42 of the multi-functional output Pr02-13, Pr02-14, Pr02-16, Pr02-17.
2
7
2
6
2
5
2
4
2
3
2
2
0
0
0
0
0
0
Read only
0~150%
0.00~655.35Hz
Chapter 12 Description of Parameter SettingsC2000 Series
0=NOT used by P LC
1=Used by PLC
2
1
2
0
R el ay 1
1
1
R el ay 2
R ese rve d
MO1
MO2
MO3
MO4
MO5
12-57
D isp la y va lu e
3 =2+1
=1x2 +1x2
1
0
=bi t 1x2 +b i t 0 x2
1
0
Factory Setting: Read only
Factory setting: 0
Factory setting：0.00
Advertisement
Table of Contents
