Tpeditor Installation Instruction; Tpeditor: Setup & Basic Functions; Edit Startup Page - Delta C2000 series User Manual

10-3 TPEditor Installation Instruction

TP functions can edit up to 256 pages (keypad), total capacity is 256KB. 50 normal objects and 10
communicationobjects can be edited per page.
1) TPEditor: Setup & Basic Functions
1. Run TPEditor version 1.30
2. Go to File(F)Click on New. The Window below will pop up. At the device type, click on the drop down
menu and choose DELTA VFD-C Inverter. At the TP type, click on the drop down menu and choose VFD-C
KeyPad. As for File Name, enter TPE0. Now click on OK.
3. You are now at the designing page. Go to Edit (E)Click on Add a New Page (A) or go to the TP page on
the upper right side, right click once on TP page and choose Add to increase one more page for editing. The
current firmware of Keypad is version1.00 and can support up to 4 pages.
4. Download setting, Go to Tool Communication settings (C) to set up the PC Com Port and Baud Rate. The
supporting speeds of Baud rate are 9600bps, 19200bps and 38400bps. The default setting of TP address is
1, please do not modify.
2)

Edit Startup Page

1. Click once on the Boot Page on the right hand side of your computer screen or click on View (V) click on
Boot Page (B). Then a blank Boot Page window will pop up. Use the circled items to design your Startup page.
Chapter 10 Digital Keypad
10-15
C2000